Electron spin resonance study on polymerization of alkyl acrylates with n-butyl titanate(IV)–triethylaluminum catalyst

n-Butyl titanate(IV)–triethylaluminum catalyst at Al/Ti molar ratios greater than 6 polymerizes methyl and n-butyl acrylates at ?78°C. The polymerization system which includes methyl acrylate at ?78°C, gives two ESR signals with g factors of 1.958 and 1.961 that overlap each other. The absorption intensity of the latter signal is approximately proportional to the polymer chain concentration calculated from polymer yield and the molecular weight. The polymerization system at Al/Ti ratios smaller than 3 has no catalytic activity on the polymerization and shows only the ESR signal with the g factor of 1.958. On the basis of these facts the ESR signal with the g factor of 1.961 is attributed to the active growing end of poly(methyl acrylate) with this catalyst. The character of this active growing end is discussed.     

Polyiodide composition in poly(vinyl acetate)-iodine-iodide complex

Polyiodide formed by complexation of poly(vinyl acetate) (PVAc) with iodine in the presence of iodide has been investigated by chemical analysis and resonance Raman spectrophotometry. When PVAc films were immersed in iodide-iodine aqueous solutions which had different ratios of iodide to iodine concentration [I^?]/[I₂], the complex films exhibited tremendous variations of swelling degree, despite the relatively small change in the amount of bound iodine. From a quantitative chemical analysis, the composition of polyiodide bound to PVAc was found to be 1.01 ± 0.035 in the molar ratio of iodide to iodine irrespective of the composition of the iodide-iodine aqueous solution ([I^?]/[I₂] = 2–500). The polyiodide formed in PVAc-iodine-iodide complex was therefore inferred to be (I₃^?)_n. Resonance Raman spectra obtained on PVAc-iodine-iodide complexes were also identical to those of the benzamide-iodine complex, in which the polyiodide consists of (I₃^?)_n, consistent with the result from chemical analysis.     

Analysis of oxidized epigallocatechin gallate by liquid chromatography/mass spectrometry

(-)-Epigallocatechin gallate (EGCG) of catechins changes from non-colored at around neutral pH to yellow at higher pH region in aqueous solution. The pH-dependent oxidation of EGCG was analyzed by liquid chromatography/electrospray ionization tandem mass spectrometry (LC/ESI-MS/MS). LC/MS/MS analysis of EGCG and its related compounds, (-)-epicatechin gallate (ECG) and (-)-epigallocatechin (EGC), successfully elucidated the structure relationship of EGCG solution involving the color change reaction at different pH conditions. The oxidation species produced at alkaline pH was detected at a different retention time from EGCG in the chromatograms of the EGCG sample. The oxidation species was found to correspond to M+14 (where M is the molecular weight of EGCG), which has two hydrogen atoms removed and addition of one oxygen atom to the gallyl moiety in the B-ring of EGCG.     

Dithiol-mediated immobilization of CdS nanoparticles from reverse micellar system onto Zn-doped silica particles and their high photocatalytic activity

Cds nanoparticles, prepared in a reverse micellar system, were immobilized directly onto alkanedithiol-modified Zn-doped silica particles, which were themselves prepared via hydrolysis of tetraethylorthosilicate in the presence of Zn(NO(3))(2) followed by contact with dithiol molecules. The resulting CdS-Zn-SiO(2) composite was then used as a photocatalyst for the generation of H(2) from 2-propanol aqueous solution. Under UV irradiation (lambda>300 nm), a high photocatalytic activity was observed for the CdS-Zn-SiO(2) composite material. This is effected by electron transfer from the photoexcited ZnS (dithiol-bonded Zn on SiO(2)) to CdS nanoparticles. The photocatalytic activity is increased with a decrease in the number of methylene groups in the dithiol molecules, according to the rank order 1,10-decanedithiol <1,6-hexanedithiol <1,2-ethanedithiol.     

Prospects of Sol-Gel Process for Spectral Hole-Burning Glasses

Persistent spectral hole burning was studied in Eu³⁺ ions-doped Al₂O₃-SiO₂ glass prepared by a sol-gel method. The gel synthesized by the hydrolysis of Si- and Al-alkoxides and EuCl₃·6H₂O was heated in air and hydrogen gas atmospheres. For the glass heated in air to contain OH bonds, the hole was formed by the photoinduced rearrangement of the OH bonds surrounding the Eu³⁺ ions, and was thermally refilled and erased above 200 K. On the other hand, the glass heated in hydrogen gas showed the hole spectrum above 200 K. It was found that the hole depth was independent of the temperature and was 7% of the total intensity at room temperature. The proposed mechanism was the electron transfer between the Eu³⁺ ions and the defect centers formed in glass matrix.     

Reaction of 2-dialkylamino-5-phenyl-1,3-oxathiolium cation with sulphur ylides

The reaction of 2-dialkylamino-5-phenyl-1,3-oxathiolium cation 1 with sulphur ylides 2 was investigated. The behavior of 1 was solvent-dependent. In CH₂Cl₂, carbamate ester 3 was obtained: in CH₃CN, the intermediate sulphonium salt 5, which on hydrolysis gave 3, was isolated. On the other hand, reaction in MeOH gave the diphenacyl derivative 6. The reaction mechanism is discussed.     

Cinnamate ester containing liquid crystalline side chain polymers

The synthesis of methacrylate esters of 4-cyanophenyl-(4-(ω-hydroxyalkyloxy)) cinnamates, with spacer lengths of 2 and 6 methylene units and the synthesis of the corresponding acrylate ester with a spacer of 2 methylene units are described. The methacrylate monomers were polymerized by free radical polymerization, both as homopolymers and as copolymers with the analogous benzoate monomer of spacer length 6. The acrylate ester could not be polymerized successfully under the same reaction conditions. Polymers were characterized by NMR spectroscopy, gel permeation chromatography, differential scanning calorimetry, and thermo-optic observations. Of the monomers prepared, only the cinnamate with a hexamethylene spacer shows a mesophase, seen on supercooling of the melt. All of the polymers prepared were liquid crystalline, with smectic behavior predominating in the polymethacrylates with the longer spacer group. A narrow nematic region is seen just below the clearing temperature with a range of 3–9°C, nematic character is increased in the copolymer series with the degree of incorporation of the cinnamate monomer with the spacer group of length 2.     

Synthetic studies on carbapenem antibiotics from penicillins. IV. Stereoselective kinetic protonation of a chiral azetidinone enolate

A stereoselective kinetic protonation of the azetidinone enolate $\text{B}$ was studied and an efficient synthesis of$\text{2}$(cis) was achieved via aldol reaction of $\text{5}$ with acetone followed by the kinetic protonation with Ph₃SnH as proton source.     

Synthesis of two naturally occurring 3-methyl-2,5-dihydro-1-benzoxepin carboxylic acids

[structures: see text] Two naturally occurring 3-methyl-2,5-dihydro-1-benzoxepin carboxylic acids, 6-hydroxy-3-methyl-8-(phenylethyl)-2,5-dihydro-1-benzoxepin-9-carboxylic acid (radulanin E) (1) and 9-hydroxy-3-methyl-2,5-dihydro-1-benzoxepin-7-carboxylic acid (2), were synthesized using Stille coupling followed by Mitsunobu cyclization.